by | Jun 17, 2015 | Coming soon
Is designed for simulating rotating speed signal at machine start-up and shut-down, including over-speed alarm and trips checking. It is optimized especially for checking the stationary CMS in the off-line condition. RSS-100 is a small and useful handheld electronic device with TFT color display and the IP65 protection level. It is a micro-controller-based digital device. It is intended for use by personnel dealing with various aspects of automatic control and protection systems, in particular related to the stationary On-line CMS, independent and/or supported by SCADA/DCS. It is used as an electronic signal simulator of rotating speed during the machine start-up, steady state operation and shut-down, as well as for checking over-speed protection system. All tests are performed in Off-line mode. The device has three Outputs: Digital – TTL (Transistor-Transistor Level logic output), Analog – Proximity Probe Output (simulates Proximity Probe Transducer) and Optical (LED Diode). Features Datasheet Software User Manual Specification – – – –...
by | Jun 17, 2015 | Coming soon
In both measurement modes, as vibration meter and a bearings control device, the instrument gives automatically both the validation result of the measured values on the screen in accordance with ISO 10816 group of standards, as well as the validation result of the condition of bearings according to BDU. VHE-100 is a small pocket-sized device with TFT color graphic display and the IP65 protection level. It is intended for operators working in the field of machine and equipment maintenance. There are two modes of operation: Vibration Meter (VM), fully compliant with the ISO 10816 group of standards and Bearing Condition Detector (BCD) for control of bearings, based on the BDU validation (Bearing Damage Unit). It is especially designed for use in difficult working conditions, at temperatures from -30 to +70 degrees Celsius, as well as in conditions of increased moisture and splashing water and other liquids. In both measurement modes, as vibration meter and a bearings control device, the instrument gives automatically both the validation result of the measured values on the screen in accordance with the ISO 10816 group of standards, as well as a validation result of the condition of bearings according to the BDU (regular, usable, unusable). Features Datasheet Software User Manual Specification – – – –...
